SR546L6T8C2-1 — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

SR546L6T8C2-1: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SHIELD, bore_diameter: 2.3125 INCHES NOMINAL IN, overall_width: 0.5620 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-030-4194, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SR546L6T8C2-1

NSN: 3110-01-030-4194
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING SHIELD
bore_diameter	2.3125 INCHES NOMINAL IN
overall_width	0.5620 INCHES NOMINAL IN
seal_quantity	4
load_direction	RADIAL
surface_finish	GROUND
shield_quantity	2
style_designator	COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
bearing_preload_rating	20.0 POUNDS NOMINAL LBS
overall_outside_diameter	2.8750 INCHES NOMINAL IN
bearing_preload_designation	MEDIUM
internal_fit-up_designation	STANDARD
NSN	3110-01-030-4194

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MOLDED

•

BEARING PRELOAD RATING: 20.0 POUNDS NOMINAL LBS

•

INTERNAL FIT-UP DESIGNATION: STANDARD

•

SURFACE FINISH: GROUND

•

BEARING PRELOAD DESIGNATION: MEDIUM

•

SHIELD QUANTITY: 2

•

STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING

•

MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MOLDED
BEARING PRELOAD RATING	20.0 POUNDS NOMINAL LBS
INTERNAL FIT-UP DESIGNATION	STANDARD
SURFACE FINISH	GROUND
BEARING PRELOAD DESIGNATION	MEDIUM
SHIELD QUANTITY	2
STYLE DESIGNATOR	COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATION	UNABLE TO DECODE
OVERALL WIDTH	0.5620 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER	2.8750 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 5

AMVW546PPTSDBReference document

Same NSN cross-reference

Reference document — Secondary reference

21006204-101Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

21006204Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

SP546PT8C2-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

SW546YZAX4K5DB22-1/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy SR546L6T8C2-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SR546L6T8C2-1?

SR546L6T8C2-1 is a BEARING,BALL,DUPLEX.

What parts can replace SR546L6T8C2-1?

There are 5 known substitutes for SR546L6T8C2-1: AMVW546PPTSDB, 21006204-101, 21006204 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SR546L6T8C2-1?

SR546L6T8C2-1 is cataloged in the U.S. Government catalog under NSN 3110-01-030-4194. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SR546L6T8C2-1 — BEARING,BALL,DUPLEX

Request a Quote — SR546L6T8C2-1