PartsTable
Technical Data Sheet
Download PDF

SR2-6PPC11K25-7 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SR2-6PPC11K25-7: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1406 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-107-7323, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR2-6PPC11K25-7
NSN: 3110-00-107-7323
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.1406 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_features0.440 IN. SHERICAL RADIUS ON BEARING OD CENTRAL SHERICAL RADIUS ON BEARING OD CENTRALIZED WITHIN 0.003 IN. IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
overall_outside_diameter0.3750 INCHES NOMINAL IN
NSN3110-00-107-7323
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SR2-6PPC11K25-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: OIL
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.3750 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALOIL
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1406 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.3750 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURES0.440 IN. SHERICAL RADIUS ON BEARING OD CENTRAL SHERICAL RADIUS ON BEARING OD CENTRALIZED WITHIN 0.003 IN. IN
SUBSTITUTES & CROSS-REFERENCES 2
1134-159Reference document
Same NSN cross-reference
Reference document — Secondary reference
M81793/04-FF1C2N1A1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy SR2-6PPC11K25-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR2-6PPC11K25-7?
SR2-6PPC11K25-7 is a BEARING,BALL,ANNULAR.
What parts can replace SR2-6PPC11K25-7?
There are 2 known substitutes for SR2-6PPC11K25-7: 1134-159, M81793/04-FF1C2N1A1. Substitute compatibility should be verified for your specific system.
What is the NSN for SR2-6PPC11K25-7?
SR2-6PPC11K25-7 is cataloged in the U.S. Government catalog under NSN 3110-00-107-7323. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR2-6PPC11K25-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.