PartsTable
Technical Data Sheet
Download PDF

SR1012SSTA — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SR1012SSTA: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A OVERALL A, bore_shape: STRAIGHT, bore_diameter: 0.3750 INCHES NOMINAL IN, contact_angle: 14.4 DEGREES MAXIMUM, overall_width: 0.1562 INCHES NOMINAL IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-071-4009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR1012SSTA
NSN: 3110-01-071-4009
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 440A OVERALL A
bore_shapeSTRAIGHT
bore_diameter0.3750 INCHES NOMINAL IN
contact_angle14.4 DEGREES MAXIMUM
overall_width0.1562 INCHES NOMINAL IN
load_directionRADIAL
surface_finishUNGROUND
shield_quantity2
special_featuresTOLERANCE ABEC NO. 7T
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
features_providedSNAP RING-GROOVE MOUNTING
internal_clearance0.0003 INCHES MINIMUM AXIAL AND 0.0008 INCHES MAXIMUM AXIAL IN
NSN3110-01-071-4009
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SR1012SSTA · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0003 INCHES MINIMUM AXIAL AND 0.0008 INCHES MAXIMUM AXIAL IN
•
SURFACE FINISH: UNGROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0003 INCHES MINIMUM AXIAL AND 0.0008 INCHES MAXIMUM AXIAL IN
SURFACE FINISHUNGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.1562 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SR1012SSTA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR1012SSTA?
SR1012SSTA is a BEARING,BALL,ANNULAR.
What is the NSN for SR1012SSTA?
SR1012SSTA is cataloged in the U.S. Government catalog under NSN 3110-01-071-4009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR1012SSTA