PartsTable
Technical Data Sheet
SR 832-75-005 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, special_features: DO NOT USE ON THE T-55 TURBINE ENGINE, center_hole_diameter: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-631-1346, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR 832-75-005
NSN: 5331-00-631-1346
FSC: 5331 — O-RING
CAGE: 95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
special_featuresDO NOT USE ON THE T-55 TURBINE ENGINE
center_hole_diameter0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-631-1346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SR 832-75-005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER: 0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SPECIAL FEATURESDO NOT USE ON THE T-55 TURBINE ENGINE
OUTSIDE DIAMETER0.230 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
101-00500Interchangeable
interchangeable cross-reference
interchangeable
MS28775-010Interchangeable
interchangeable cross-reference
interchangeable
58-010-15Interchangeable
interchangeable cross-reference
interchangeable
838949Interchangeable
interchangeable cross-reference
interchangeable
7377005Interchangeable
interchangeable cross-reference
interchangeable
6240PL2151259Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy SR 832-75-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR 832-75-005?
SR 832-75-005 is a O-RING.
What parts can replace SR 832-75-005?
There are 18 known substitutes for SR 832-75-005: 101-00500, MS28775-010, 58-010-15 and 15 more. Substitute compatibility should be verified for your specific system.
Is SR 832-75-005 still available?
SR 832-75-005 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR 832-75-005