SPG55 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

SPG55: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 0.10 POUNDS MINIMUM AND 0.12 POUNDS MAXIMUM LBS, coil_quantity: 4 1/2, inside_diameter: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5360-01-076-3505, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SPG55

NSN: 5360-01-076-3505
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 0AT62 — SIEMENS ENERGY, INC. DBA DRESSER-RAND (USA)

SPECIFICATIONS

material	STEEL COMP 302 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
load_rating	0.10 POUNDS MINIMUM AND 0.12 POUNDS MAXIMUM LBS
coil_quantity	4 1/2
inside_diameter	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
spring_free_length	0.500 INCHES NOMINAL IN
spring_solid_length	0.175 INCHES MAXIMUM IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_length_under_load	0.391 INCHES NOMINAL IN
spring_free_outside_diameter	0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
material_document_and_classification	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5360-01-076-3505

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN

•

LOAD RATING: 0.10 POUNDS MINIMUM AND 0.12 POUNDS MAXIMUM LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.175 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 0.500 INCHES NOMINAL IN

•

INSIDE DIAMETER: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
LOAD RATING	0.10 POUNDS MINIMUM AND 0.12 POUNDS MAXIMUM LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.175 INCHES MAXIMUM IN
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	0.500 INCHES NOMINAL IN
INSIDE DIAMETER	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
SPRING LENGTH UNDER LOAD	0.391 INCHES NOMINAL IN
COIL QUANTITY	4 1/2

SUBSTITUTES & CROSS-REFERENCES 4

D4524-1671Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

33010003Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

TC3029WHReference document

Same NSN cross-reference

Reference document — Secondary reference

80944Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy SPG55?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SPG55?

SPG55 is a SPRING,HELICAL,COMPRESSION.

What parts can replace SPG55?

There are 4 known substitutes for SPG55: D4524-1671, 33010003, TC3029WH and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SPG55?

SPG55 is cataloged in the U.S. Government catalog under NSN 5360-01-076-3505. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SPG55 — SPRING,HELICAL,COMPRESSION

Request a Quote — SPG55