PartsTable
Technical Data Sheet
Download PDF

SPFL-35-005 — ROD END,THREADED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SPFL-35-005: ROD END,THREADED.

The ROD END,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2B OVERALL, thread_length: 0.407 INCHES MINIMUM AND 0.467 INCHES MAXIMUM OVERALL IN, thread_direction: LEFT-HAND OVERALL, nominal_thread_size: 0.190 INCHES OVERALL IN, end_item_identification: 2520-01-471-1325. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-482-0229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SPFL-35-005
NSN: 5340-01-482-0229
FSC: 5340 — Hardware, Commercial
CAGE: 01428 — CABLECRAFT MOTION CONTROLS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2B OVERALL
thread_length0.407 INCHES MINIMUM AND 0.467 INCHES MAXIMUM OVERALL IN
thread_directionLEFT-HAND OVERALL
nominal_thread_size0.190 INCHES OVERALL IN
end_item_identification2520-01-471-1325
thread_series_designatorUNF OVERALL
NSN5340-01-482-0229
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SPFL-35-005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.467 INCHES MAXIMUM OVERALL IN
•
THREAD DIRECTION: LEFT-HAND OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES OVERALL IN
•
THREAD CLASS: 2B OVERALL
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNF OVERALL
TECHNICAL CHARACTERISTICS
THREAD LENGTH0.407 INCHES MINIMUM AND 0.467 INCHES MAXIMUM OVERALL IN
THREAD DIRECTIONLEFT-HAND OVERALL
NOMINAL THREAD SIZE0.190 INCHES OVERALL IN
THREAD CLASS2B OVERALL
END ITEM IDENTIFICATION2520-01-471-1325
MATERIALSTEEL OVERALL
MATERIALPLASTIC BUSHING
THREAD SERIES DESIGNATORUNF OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
11629714Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
11629714-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SPFL-35-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SPFL-35-005?
SPFL-35-005 is a ROD END,THREADED.
What parts can replace SPFL-35-005?
There are 2 known substitutes for SPFL-35-005: 11629714, 11629714-1. Substitute compatibility should be verified for your specific system.
What is the NSN for SPFL-35-005?
SPFL-35-005 is cataloged in the U.S. Government catalog under NSN 5340-01-482-0229. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SPFL-35-005