PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP9
SP9 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BOX CONNECTOR,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_height: 1.050 INCHES NOMINAL IN, outside_diameter: 2.380 INCHES NOMINAL IN, overall_diameter: 2.970 INCHES NOMINAL IN, style_designator: INSIDE CAM TYPE W/ LUGS, pressure_relief_method: MANUAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP9
NSN: 3110-00-100-6216
FSC: 3110
CAGE: 24785 — VICKERS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cam_quantity2
overall_height1.050 INCHES NOMINAL IN
outside_diameter2.380 INCHES NOMINAL IN
overall_diameter2.970 INCHES NOMINAL IN
style_designatorINSIDE CAM TYPE W/ LUGS
pressure_relief_methodMANUAL
end_item_identificationWEAPON SYSTEM E/I SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE)
maximum_working_pressure7.000 POUNDS PER SQUARE INCH (PSI) LBS
system_for_which_designedPRESSURIZED
NSN3110-00-100-6216
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SP9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESMETALLIC HARDNESS RATING ROCKWELL C MIN 50.0 IN. AND MAX 58.0 IN. IN
ROLLING ELEMENT DIAMETER0.3750 INCHES NOMINAL IN
STYLE DESIGNATORBALL
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
3X324-3-4Interchangeable
interchangeable cross-reference
interchangeable
215943Interchangeable
interchangeable cross-reference
interchangeable
21511Interchangeable
interchangeable cross-reference
interchangeable
200340Interchangeable
interchangeable cross-reference
interchangeable
MJH3-001-60Interchangeable
interchangeable cross-reference
interchangeable
AAE975M703Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP9?
SP9 is a BOX CONNECTOR,ELECTRICAL.
What parts can replace SP9?
There are 26 known substitutes for SP9: 3X324-3-4, 215943, 21511 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SP9?
SP9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026