PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP4300-13
SP4300-13 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thickness: 0.020 INCHES NOMINAL IN, hole_diameter: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, overall_diameter: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-558-9201, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP4300-13
NSN: 5310-00-558-9201
FSC: 5310
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.020 INCHES NOMINAL IN
hole_diameter0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
overall_diameter0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-558-9201
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SP4300-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
THICKNESS: 0.020 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
THICKNESS0.020 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
500414Interchangeable
interchangeable cross-reference
interchangeable
SDBX2BDInterchangeable
interchangeable cross-reference
interchangeable
900414Interchangeable
interchangeable cross-reference
interchangeable
GW10U55AA3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP4300-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP4300-13?
SP4300-13 is a WASHER,FLAT.
What parts can replace SP4300-13?
There are 4 known substitutes for SP4300-13: 500414, SDBX2BD, 900414 and 1 more. Substitute compatibility should be verified for your specific system.
Is SP4300-13 still available?
SP4300-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP4300-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026