PartsTable
Technical Data Sheet
Download PDF

SP3231 — SCREW,MACHINE

✓ Government record, cited
Legrand · BOLT SCREW
PRODUCT OVERVIEW

SP3231: SCREW,MACHINE.

Plates to fit 1, 2 and 3 compartment boxes are all 100 mm wide 4 compartment plates are 75 mm wide Non-standard sockets have a round earth pin Due to overall depth, RCD sockets and wave type data plates will NOT fit in the flush floor and shallow flush floor ranges (Cat. Nos. FFO/AFS).

When using with underfloor duct systems (Cat. No. AFU) the outlet box must be raised by 8 mm from the lowest point to allow for wiring This part is cataloged in the U.S.

Government catalog under NSN 5305-00-274-0295, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
SP3231
NSN: 5305-00-274-0295
FSC: 5305 — Screws
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.187 INCHES NOMINAL IN
thread_class2A A
head_diameter0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
thread_length0.322 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY 482
fastener_length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-00-274-0295
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SP3231 · Legrand ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.187 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.322 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY 482
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.187 INCHES NOMINAL IN
FASTENER LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
THREAD LENGTH0.322 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY 482
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SP3231?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP3231?
SP3231 is a SCREW,MACHINE manufactured by Legrand.
What is the NSN for SP3231?
SP3231 is cataloged in the U.S. Government catalog under NSN 5305-00-274-0295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP3231