PartsTable
Technical Data Sheet
Download PDF

SP28G8 — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SP28G8: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, first_end_style: POINTED, second_end_style: SQUARE, first_end_location: POINTED END, pin_overall_length: 1.070 INCHES NOMINAL IN, pin_size_designation: 4/0. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-057-8027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP28G8
NSN: 5315-01-057-8027
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 05457 — BRITISH AEROSPACE NORTH AMERICA INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_stylePOINTED
second_end_styleSQUARE
first_end_locationPOINTED END
pin_overall_length1.070 INCHES NOMINAL IN
pin_size_designation4/0
first_end_taper_length0.062 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-057-8027
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SP28G8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
FIRST END LOCATION: POINTED END
•
FIRST END STYLE: POINTED
•
PIN OVERALL LENGTH: 1.070 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
PIN SIZE DESIGNATION: 4/0
•
SECOND END STYLE: SQUARE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
FIRST END LOCATIONPOINTED END
FIRST END STYLEPOINTED
PIN OVERALL LENGTH1.070 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
PIN SIZE DESIGNATION4/0
SECOND END STYLESQUARE
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy SP28G8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP28G8?
SP28G8 is a PIN,TAPERED,PLAIN.
What is the NSN for SP28G8?
SP28G8 is cataloged in the U.S. Government catalog under NSN 5315-01-057-8027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP28G8