PartsTable
Technical Data Sheet

SP17-13 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: RUBBER AND FIBER AND FIBER SYNTHETIC OR RUBBER NATURAL BODY, performance_type: LIGHT DUTY, style_designator: PLAIN, cross-sectional_size: 5L, strengthening_feature: FIBER CORD, end_item_identification: GRUMMAN A10 AIRCRAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-126-5277, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP17-13
NSN: 5330-00-126-5277
FSC: 5330
CAGE: 92021 — IMI CRITICAL ENGR PBM LLC (USA)
SPECIFICATIONS
materialRUBBER AND FIBER AND FIBER SYNTHETIC OR RUBBER NATURAL BODY
performance_typeLIGHT DUTY
style_designatorPLAIN
cross-sectional_size5L
strengthening_featureFIBER CORD
end_item_identificationGRUMMAN A10 AIRCRAFT
nominal_effective_outside_length37.000 INCHES IN
NSN5330-00-126-5277
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP17-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
•
RIM SURFACE WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
RIM SURFACE WIDTH0.125 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.997 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
5L370InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
34136InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
635576InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
SP-17-13AInterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
MW3390InterchangeableGOVERNMENT REGISTRY
Resistor,fixed,wire Wound
interchangeable
2M037InterchangeableGOVERNMENT REGISTRY
Resistor,fixed,wire Wound
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP17-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP17-13?
SP17-13 is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace SP17-13?
There are 14 known substitutes for SP17-13: 5L370, 34136, 635576 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SP17-13?
SP17-13 is cataloged in the Federal Logistics Information System under NSN 5330-00-126-5277. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP17-13