PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP133-107
SP133-107 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, special_features: CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200, peripheral_diameter: 1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN, center_hole_diameter: 0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-756-7518, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP133-107
NSN: 5330-00-756-7518
FSC: 5330
CAGE: 86768 — TELEDYNE INDUSTRIES INC TELEDYNE FLUID SYSTEMS REPUBLIC BUSINESS UNIT (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
peripheral_diameter1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
center_hole_diameter0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5330-00-756-7518
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP133-107 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
PERIPHERAL DIAMETER: 1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
PERIPHERAL DIAMETER1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
934273Interchangeable
interchangeable cross-reference
interchangeable
2-119 V747-75Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-119ESInterchangeable
interchangeable cross-reference
interchangeable
1000-0030-119CPInterchangeable
interchangeable cross-reference
interchangeable
1000-0030-119Interchangeable
interchangeable cross-reference
interchangeable
MILR25897ARP568 -119Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP133-107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP133-107?
SP133-107 is a PACKING,PREFORMED.
What parts can replace SP133-107?
There are 6 known substitutes for SP133-107: 934273, 2-119 V747-75, M83248-1-119ES and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SP133-107?
SP133-107 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-756-7518. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP133-107

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026