PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP1275
SP1275 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.625 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-2476, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP1275
NSN: 5340-00-598-2476
FSC: 5340
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.750 INCHES NOMINAL IN
overall_length1.625 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentCADMIUM OR ZINC
material_thickness0.078 INCHES NOMINAL IN
mounting_hole_size0.281 INCHES NOMINAL IN
inside_diameter/arch_length0.613 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
distance_between_base_and_inside_of_arch0.593 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
center_to_center_distance_between_arch_and_mounting_hole0.828 INCHES NOMINAL IN
NSN5340-00-598-2476
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP1275 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.281 INCHES NOMINAL IN
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: CADMIUM OR ZINC
•
STYLE DESIGNATOR: CURVED ARCH
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.593 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.078 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE SIZE0.281 INCHES NOMINAL IN
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTCADMIUM OR ZINC
STYLE DESIGNATORCURVED ARCH
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.593 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
MATERIAL THICKNESS0.078 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
INSIDE DIAMETER/ARCH LENGTH0.613 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
OVERALL LENGTH1.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
130Upgraded Successor
successor cross-reference
successor
13015Upgraded Successor
successor cross-reference
successor
5711-130Upgraded Successor
successor cross-reference
successor
120873Interchangeable
interchangeable cross-reference
interchangeable
C120872PIECE1Interchangeable
interchangeable cross-reference
interchangeable
C120872Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP1275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP1275?
SP1275 is a STRAP,RETAINING.
What parts can replace SP1275?
There are 6 known substitutes for SP1275: 130, 13015, 5711-130 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SP1275?
SP1275 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-2476. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP1275

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026