PartsTable
Technical Data Sheet
Download PDF

SP12511-3-5 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SP12511-3-5: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.375 INCHES NOMINAL IN, length: 0.410 INCHES NOMINAL IN, material: STEEL COMP 1065 OVERALL, loop_radius: 0.480 INCHES NOMINAL IN, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.450 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-814-6900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP12511-3-5
NSN: 5340-00-814-6900
FSC: 5340 — Hardware, Commercial
CAGE: 23663 — JOSLYN PRODUCTS (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
length0.410 INCHES NOMINAL IN
materialSTEEL COMP 1065 OVERALL
loop_radius0.480 INCHES NOMINAL IN
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.450 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.281 INCHES NOMINAL IN
distance_from_loop_center_to_end0.250 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-814-6900
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP12511-3-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.410 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP RADIUS: 0.480 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.450 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
LENGTH0.410 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP RADIUS0.480 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.281 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1065 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy SP12511-3-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP12511-3-5?
SP12511-3-5 is a CLIP,SPRING TENSION.
What is the NSN for SP12511-3-5?
SP12511-3-5 is cataloged in the U.S. Government catalog under NSN 5340-00-814-6900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP12511-3-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.