PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP-16
SP-16 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The ENCODER,SHAFT ANGLE TO DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 0.330 INCHES NOMINAL IN, drive_type: SERRATED, head_style: FLAT CHAMFER, design_type: THREADED, head_height: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-276-2294, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP-16
NSN: 5305-00-276-2294
FSC: 5305
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL
thickness0.330 INCHES NOMINAL IN
drive_typeSERRATED
head_styleFLAT CHAMFER
design_typeTHREADED
head_height0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
flange_width2.750 INCHES NOMINAL IN
thread_class2A A
flange_length2.310 INCHES NOMINAL IN
head_diameter0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_length0.203 INCHES MINIMUM IN
overall_height1.478 INCHES NOMINAL IN
NSN5305-00-276-2294
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SP-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.278 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD DIAMETER: 0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.203 INCHES MINIMUM IN
•
HEAD HEIGHT: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
SCREW MATERIAL: COPPER ALLOY 482
•
NOMINAL THREAD DIAMETER: 0.156 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.278 INCHES NOMINAL IN
THREAD CLASS2A A
INTERNAL DRIVE STYLESLOT
HEAD DIAMETER0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD LENGTH0.203 INCHES MINIMUM IN
HEAD HEIGHT0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SCREW MATERIALCOPPER ALLOY 482
NOMINAL THREAD DIAMETER0.156 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH36
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
SP16Interchangeable
interchangeable cross-reference
interchangeable
ASP-16Interchangeable
interchangeable cross-reference
interchangeable
10117326Interchangeable
interchangeable cross-reference
interchangeable
RAD116Interchangeable
interchangeable cross-reference
interchangeable
RC119Interchangeable
interchangeable cross-reference
interchangeable
SPRTG0-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP-16?
SP-16 is a ENCODER,SHAFT ANGLE TO DIGITAL.
What parts can replace SP-16?
There are 7 known substitutes for SP-16: SP16, ASP-16, 10117326 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SP-16?
SP-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-276-2294. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026