PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP-10
SP-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SPILL CLEAN-UP KIT,HAZARDOUS MAT. Key specifications include usage_design: AIR RESCUE, document_type: CATALOG SHEET, lubricant_type: ANY ACCEPTABLE, fatty_material_type: ANY ACCEPTABLE, end_item_identification: ARMOURED VEHICLE(BOXER), service_characteristics: ANY ACCEPTABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-688-0222, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP-10
NSN: 5340-00-688-0222
FSC: 5340
CAGE: 70236 — TACTAIR FLUID CONTROLS INC (USA)
SPECIFICATIONS
usage_designAIR RESCUE
document_typeCATALOG SHEET
lubricant_typeANY ACCEPTABLE
special_featuresCLEAR COLORLESS LIQUID; MILD ODOR; BOILING PT 180C; MELT/FREEZING PT -54F; CHEM STABLE; POLYAKYLENE GLYCOL 90-100% MIXTURE
fatty_material_typeANY ACCEPTABLE
end_item_identificationARMOURED VEHICLE(BOXER)
service_characteristicsANY ACCEPTABLE
component_document_originINDUSTRIAL
component_document_page_numberP6
quantity_within_each_unit_package8.45 OUNCES, FLUID OZ
minimum_flash_point_and_test_method230.0 CELSIUS CLEVELAND OPEN CUP DEGC
part_name_assigned_by_controlling_agencyPOLYAKYLENE GLYCOL MIXTURE
NSN5340-00-688-0222
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 7/8-14 UNF
•
MATERIAL: ALUMINUM
•
FEATURES PROVIDED: SHOULDER
•
OVERALL DIAMETER: 1.094 INCHES MAXIMUM IN
•
DRIVE TYPE: SERRATED
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPETHREADED
THREAD SIZE AND SERIES/TYPE DESIGNATOR7/8-14 UNF
MATERIALALUMINUM
FEATURES PROVIDEDSHOULDER
OVERALL DIAMETER1.094 INCHES MAXIMUM IN
DRIVE TYPESERRATED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
293M0041P003Upgraded Successor
successor cross-reference
successor
SP10Upgraded Successor
successor cross-reference
successor
99-4104-10Upgraded Successor
successor cross-reference
successor
M5501/1-10Upgraded Successor
successor cross-reference
successor
5340PL1879472Upgraded Successor
successor cross-reference
successor
SP15Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP-10?
SP-10 is a SPILL CLEAN-UP KIT,HAZARDOUS MAT.
What parts can replace SP-10?
There are 9 known substitutes for SP-10: 293M0041P003, SP10, 99-4104-10 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SP-10?
SP-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-688-0222. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026