PartsTable
Technical Data Sheet
Download PDF

SP 29005 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SP 29005: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, POLYETHYLENE (PP), drive_type: RAISED RIB, design_type: THREADED, thread_class: 2A A, overall_diameter: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, features_provided: BEVELED SEAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-313-3648, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP 29005
NSN: 5340-01-313-3648
FSC: 5340 — Hardware, Commercial
CAGE: K1016 — EATON LIMITED (GBR)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
drive_typeRAISED RIB
design_typeTHREADED
thread_class2A A
overall_diameter0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
features_providedBEVELED SEAT
thread_size_and_series/type_designator0.562-18 UNF
NSN5340-01-313-3648
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP 29005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
•
DRIVE TYPE: RAISED RIB
•
FEATURES PROVIDED: BEVELED SEAT
•
THREAD CLASS: 2A A
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.562-18 UNF
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
DRIVE TYPERAISED RIB
FEATURES PROVIDEDBEVELED SEAT
THREAD CLASS2A A
MATERIALPLASTIC, POLYETHYLENE (PP)
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.562-18 UNF
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5618-8056-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SP 29005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP 29005?
SP 29005 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace SP 29005?
There is 1 known substitute for SP 29005: 5618-8056-001. Substitute compatibility should be verified for your specific system.
What is the NSN for SP 29005?
SP 29005 is cataloged in the U.S. Government catalog under NSN 5340-01-313-3648. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP 29005

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.