PartsTable
Technical Data Sheet
Download PDF

SNW11X1 15-16 — ADAPTER SLEEVE,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SNW11X1 15-16: ADAPTER SLEEVE,BEARING.

The ADAPTER SLEEVE,BEARING is a the manufacturer industrial component. Key specifications include taper: 1.0000 PER FOOT IN INCHES NOMINAL, material: STEEL OVERALL, bore_diameter: 1.9375 INCHES MINIMUM AND 1.9415 INCHES MAXIMUM IN, overall_length: 1.8338 INCHES MINIMUM AND 1.8538 INCHES MAXIMUM IN, special_features: SPLIT SLEEVE, style_designator: W/NUT AND WASHER. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-3350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SNW11X1 15-16
NSN: 3110-00-227-3350
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
taper1.0000 PER FOOT IN INCHES NOMINAL
materialSTEEL OVERALL
bore_diameter1.9375 INCHES MINIMUM AND 1.9415 INCHES MAXIMUM IN
overall_length1.8338 INCHES MINIMUM AND 1.8538 INCHES MAXIMUM IN
special_featuresSPLIT SLEEVE
style_designatorW/NUT AND WASHER
overall_outside_diameter2.2730 INCHES MINIMUM AND 2.2770 INCHES MAXIMUM IN
NSN3110-00-227-3350
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SNW11X1 15-16 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TAPER: 1.0000 PER FOOT IN INCHES NOMINAL
•
STYLE DESIGNATOR: W/NUT AND WASHER
•
OVERALL OUTSIDE DIAMETER: 2.2730 INCHES MINIMUM AND 2.2770 INCHES MAXIMUM IN
•
BORE DIAMETER: 1.9375 INCHES MINIMUM AND 1.9415 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
TAPER1.0000 PER FOOT IN INCHES NOMINAL
STYLE DESIGNATORW/NUT AND WASHER
OVERALL LENGTH1.8338 INCHES MINIMUM AND 1.8538 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.2730 INCHES MINIMUM AND 2.2770 INCHES MAXIMUM IN
SPECIAL FEATURESSPLIT SLEEVE
BORE DIAMETER1.9375 INCHES MINIMUM AND 1.9415 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
09-20017Reference document
Same NSN cross-reference
Reference document — Secondary reference
SNW11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy SNW11X1 15-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SNW11X1 15-16?
SNW11X1 15-16 is a ADAPTER SLEEVE,BEARING.
What parts can replace SNW11X1 15-16?
There are 2 known substitutes for SNW11X1 15-16: 09-20017, SNW11. Substitute compatibility should be verified for your specific system.
What is the NSN for SNW11X1 15-16?
SNW11X1 15-16 is cataloged in the U.S. Government catalog under NSN 3110-00-227-3350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SNW11X1 15-16