PartsTable
Technical Data Sheet
Download PDF

SNT50963C06J8 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SNT50963C06J8: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: UNDERCUT PAN NO. 2, head_height: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.282 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN, thread_length: 0.485 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, screw_material: STEEL.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-252-3748, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SNT50963C06J8
NSN: 5305-01-252-3748
FSC: 5305 — Screws
CAGE: 02310 — PATTONAIR USA INC DBA INCORA DIV UNISEAL DIVISION (USA)
SPECIFICATIONS
head_styleUNDERCUT PAN NO. 2
head_height0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.282 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
thread_length0.485 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.485 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
special_featuresSCREW HAS GROOVE FOR O RING TO SERVE AS A SEAL IT'S ID. IS 0.123/0.133 IN.,THE THICKNESS IS 0.050 IN.,MATERIAL IS BUNA N PER MIL-G-21569 IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentOXIDE
NSN5305-01-252-3748
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SNT50963C06J8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: OXIDE
•
FASTENER LENGTH: 0.485 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A-582 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.485 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: UNDERCUT PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTOXIDE
FASTENER LENGTH0.485 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A-582 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.485 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEUNDERCUT PAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
SPECIAL FEATURESSCREW HAS GROOVE FOR O RING TO SERVE AS A SEAL IT'S ID. IS 0.123/0.133 IN.,THE THICKNESS IS 0.050 IN.,MATERIAL IS BUNA N PER MIL-G-21569 IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
SM-C-808801-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
SNT50171-06A8AB131Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SNT50963C06J8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SNT50963C06J8?
SNT50963C06J8 is a SCREW,MACHINE.
What parts can replace SNT50963C06J8?
There are 2 known substitutes for SNT50963C06J8: SM-C-808801-1, SNT50171-06A8AB131. Substitute compatibility should be verified for your specific system.
What is the NSN for SNT50963C06J8?
SNT50963C06J8 is cataloged in the U.S. Government catalog under NSN 5305-01-252-3748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SNT50963C06J8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.