SNT50425K9 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

SNT50425K9: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: UNDERCUT PAN NO. 2, head_height: 0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.335 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN, thread_length: 0.530 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-370-0625, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SNT50425K9

NSN: 5305-01-370-0625
FSC: 5305 — Screws
CAGE: 02310 — PATTONAIR USA INC DBA INCORA DIV UNISEAL DIVISION (USA)

SPECIFICATIONS

head_style	UNDERCUT PAN NO. 2
head_height	0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.335 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN
thread_length	0.530 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
screw_material	STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305
fastener_length	0.530 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
special_features	COMES WITH FLUOROSILICONE RUBBER MIL-R-25988, TY II CL I GR 70 O-RING
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.112 INCHES IN
screw_surface_treatment	PASSIVATE
NSN	5305-01-370-0625

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: PASSIVATE

•

FASTENER LENGTH: 0.530 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES

•

THREAD LENGTH: 0.530 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.112 INCHES IN

•

HEAD STYLE: UNDERCUT PAN NO. 2

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	PASSIVATE
FASTENER LENGTH	0.530 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
THREAD LENGTH	0.530 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD STYLE	UNDERCUT PAN NO. 2
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305
SPECIAL FEATURES	COMES WITH FLUOROSILICONE RUBBER MIL-R-25988, TY II CL I GR 70 O-RING

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 2

312A4730P2Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

SNT50425E9Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy SNT50425K9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SNT50425K9?

SNT50425K9 is a SCREW,MACHINE.

What parts can replace SNT50425K9?

There are 2 known substitutes for SNT50425K9: 312A4730P2, SNT50425E9. Substitute compatibility should be verified for your specific system.

What is the NSN for SNT50425K9?

SNT50425K9 is cataloged in the U.S. Government catalog under NSN 5305-01-370-0625. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SNT50425K9 — SCREW,MACHINE

Request a Quote — SNT50425K9