PartsTable
Technical Data Sheet
Download PDF

SNT5017106A6 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SNT5017106A6: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR NICKEL ALLOY OVERALL, head_style: PAN NO. 2, head_height: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_class: 2A A, chamfer_angle: 45.0 DEGREES NOMINAL, head_diameter: 0.282 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-613-2740, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SNT5017106A6
NSN: 5305-01-613-2740
FSC: 5305 — Screws
CAGE: 02310 — PATTONAIR USA INC DBA INCORA DIV UNISEAL DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR NICKEL ALLOY OVERALL
head_stylePAN NO. 2
head_height0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_class2A A
chamfer_angle45.0 DEGREES NOMINAL
head_diameter0.282 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
thread_length0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
fastener_length0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
special_featuresO-RING MATERIAL BUNA N AND ARE LOCATED ON THE UNDERNEATH SIDE OF THE HEAD
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
internal_drive_styleCROSS RECESS TYPE III
NSN5305-01-613-2740
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SNT5017106A6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
EXTERNAL THREAD TOLERANCE CLASS: 21
•
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924, CLASS II, BLACK OXIDE, MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A266 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-763, STAINLESS STEEL STEEL 302, 304, 305 OR 16-13 CHROME-NICKEL FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: PAN NO. 2
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
EXTERNAL THREAD TOLERANCE CLASS21
FASTENER LENGTH0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924, CLASS II, BLACK OXIDE, MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A266 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-763, STAINLESS STEEL STEEL 302, 304, 305 OR 16-13 CHROME-NICKEL FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
COLORBLACK OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
535459-71Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
535459Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SNT5017106A6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SNT5017106A6?
SNT5017106A6 is a SCREW,CAP,SOCKET HEAD.
What parts can replace SNT5017106A6?
There are 2 known substitutes for SNT5017106A6: 535459-71, 535459. Substitute compatibility should be verified for your specific system.
What is the NSN for SNT5017106A6?
SNT5017106A6 is cataloged in the U.S. Government catalog under NSN 5305-01-613-2740. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SNT5017106A6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.