PartsTable
Technical Data Sheet
Download PDF

SNRG.M113.0801.032 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SNRG.M113.0801.032: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 6.955 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN, length: 6.955 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 5083, body_thickness: 0.125 INCHES NOMINAL IN, corner_bevel_length: 1.000 INCHES NOMINAL IN, securing_device_type: THREADED FASTENER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-128-9568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SNRG.M113.0801.032
NSN: 5340-01-128-9568
FSC: 5340 — Hardware, Commercial
CAGE: A42KJ
SPECIFICATIONS
width6.955 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
length6.955 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
materialALUMINUM ALLOY 5083
body_thickness0.125 INCHES NOMINAL IN
corner_bevel_length1.000 INCHES NOMINAL IN
securing_device_typeTHREADED FASTENER
peripheral_shape_styleRECTANGLE, FOUR HOLES
end_item_identification2350-01-203-0188
cross-sectional_shape_styleFLAT
distance_between_holes_along_width5.405 INCHES NOMINAL IN
distance_between_holes_along_length5.405 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_width1.187 INCHES NOMINAL IN
NSN5340-01-128-9568
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SNRG.M113.0801.032 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 1.187 INCHES NOMINAL IN
•
LENGTH: 6.955 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 5.405 INCHES NOMINAL IN
•
CORNER BEVEL LENGTH: 1.000 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 5.405 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
SECURING DEVICE TYPE: THREADED FASTENER
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 1.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH1.187 INCHES NOMINAL IN
LENGTH6.955 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG LENGTH5.405 INCHES NOMINAL IN
CORNER BEVEL LENGTH1.000 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH5.405 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPETHREADED FASTENER
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH1.187 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
WIDTH6.955 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12269480Reference document
Same NSN cross-reference
Reference document — NATO reproduction reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SNRG.M113.0801.032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SNRG.M113.0801.032?
SNRG.M113.0801.032 is a COVER,ACCESS.
What parts can replace SNRG.M113.0801.032?
There is 1 known substitute for SNRG.M113.0801.032: 12269480. Substitute compatibility should be verified for your specific system.
What is the NSN for SNRG.M113.0801.032?
SNRG.M113.0801.032 is cataloged in the U.S. Government catalog under NSN 5340-01-128-9568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SNRG.M113.0801.032

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.