PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SNRG.6V53.011
SNRG.6V53.011 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNRG.6V53.011 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-055-1584, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SNRG.6V53.011
NSN: 5330-00-055-1584
FSC: 5330
CAGE: A42KJ
SPECIFICATIONS
Part NumberSNRG.6V53.011
NSN5330-00-055-1584
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SNRG.6V53.011 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE LENGTH: 2.720 INCHES NOMINAL IN
•
APERTURE WIDTH: 1.120 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.560 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH4.260 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE LENGTH2.720 INCHES NOMINAL IN
OVERALL WIDTH2.120 INCHES NOMINAL IN
APERTURE WIDTH1.120 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.560 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
546928Interchangeable
interchangeable cross-reference
interchangeable
5330000546928Interchangeable
interchangeable cross-reference
interchangeable
33051Interchangeable
interchangeable cross-reference
interchangeable
GF-470Interchangeable
interchangeable cross-reference
interchangeable
FF0022000Interchangeable
interchangeable cross-reference
interchangeable
33051NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SNRG.6V53.011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SNRG.6V53.011?
SNRG.6V53.011 is a SNRG.6V53.011.
What parts can replace SNRG.6V53.011?
There are 13 known substitutes for SNRG.6V53.011: 546928, 5330000546928, 33051 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SNRG.6V53.011?
SNRG.6V53.011 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-055-1584. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SNRG.6V53.011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026