PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SNPS014RR
SNPS014RR ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 0.8750 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-191-3228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SNPS014RR
NSN: 3110-01-191-3228
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter0.8750 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN
seal_quantity2
alignment_typeSELF-ALIGNING
load_directionRADIAL
surface_finishGROUND
inner_ring_width1.1563 INCHES NOMINAL IN
outer_ring_width0.6250 INCHES NOMINAL IN
style_designatorSINGLE ROW BALL, EXTERNAL SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH SETSCREW IN INNER RING
bearing_seal_typeCONTACT
features_providedLUBRICATION HOLE AND SNAP RING-GROOVE MOUNTING
NSN3110-01-191-3228
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SNPS014RR · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BALL
•
BORE DIAMETER: 0.8750 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
FEATURES PROVIDED: LUBRICATION HOLE AND SNAP RING-GROOVE MOUNTING
•
ALIGNMENT TYPE: SELF-ALIGNING
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BALL
MATERIALSTEEL OUTER RING
BORE DIAMETER0.8750 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
FEATURES PROVIDEDLUBRICATION HOLE AND SNAP RING-GROOVE MOUNTING
ALIGNMENT TYPESELF-ALIGNING
SELF-ALIGNMENT LOCATIONEXTERNAL
INNER RING WIDTH1.1563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1N4007Interchangeable
interchangeable cross-reference
interchangeable
DD-R0020-007Interchangeable
interchangeable cross-reference
interchangeable
11-16476-00Interchangeable
interchangeable cross-reference
interchangeable
30-0023Interchangeable
interchangeable cross-reference
interchangeable
MS91531-4N2BInterchangeable
interchangeable cross-reference
interchangeable
BA2RL2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SNPS014RR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SNPS014RR?
SNPS014RR is a BEARING,BALL,ANNULAR.
What parts can replace SNPS014RR?
There are 10 known substitutes for SNPS014RR: 1N4007, DD-R0020-007, 11-16476-00 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SNPS014RR?
SNPS014RR is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-191-3228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SNPS014RR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026