The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.796 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND HIGH SPEED AND W/STROBE, inclosure_material: CERAMIC AND GLASS, storage_temp_range: -65.0 TO 150.0 CELSIUS DEGC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-543-1920, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| body_height | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| body_length | 0.796 INCHES MAXIMUM IN |
| features_provided | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND HIGH SPEED AND W/STROBE |
| inclosure_material | CERAMIC AND GLASS |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | 7 INPUT |
| inclosure_configuration | DUAL-IN-LINE |
| terminal_surface_treatment | SOLDER |
| terminal_type_and_quantity | 14 PRINTED CIRCUIT |
| specification/standard_data | 81349-MIL-M-38510/104 GOVERNMENT SPECIFICATION |
| NSN | 5962-00-543-1920 |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| MAXIMUM POWER DISSIPATION RATING | 550.0 MILLIWATTS |
| INCLOSURE MATERIAL | CERAMIC AND GLASS |
| TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-1 MIL-M-38510 |
| TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 7.0 VOLTS MAXIMUM POWER SOURCE |
| TIME RATING PER CHACTERISTIC | 40.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 35.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT NS |
| INPUT CIRCUIT PATTERN | 7 INPUT |