SMP185 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

SMP185: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 15, inside_diameter: 0.923 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-360-6256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SMP185

NSN: 5360-00-360-6256
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 38056 — ASHCROFT INC DBA HEISE (USA)

SPECIFICATIONS

material	STEEL OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity	15
inside_diameter	0.923 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
surface_treatment	CADMIUM OVERALL
spring_free_length	5.141 INCHES MINIMUM AND 5.203 INCHES MAXIMUM IN
coil_helix_direction	LEFT-HAND
spring_deflection_rate	92.150 POUNDS PER INCH MINIMUM AND 97.850 POUNDS PER INCH MAXIMUM LBS
spring_free_outside_diameter	1.328 INCHES NOMINAL IN
NSN	5360-00-360-6256

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 1.328 INCHES NOMINAL IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

STYLE DESIGNATOR: CYLINDRICAL

•

SPRING FREE LENGTH: 5.141 INCHES MINIMUM AND 5.203 INCHES MAXIMUM IN

•

SPRING DEFLECTION RATE: 92.150 POUNDS PER INCH MINIMUM AND 97.850 POUNDS PER INCH MAXIMUM LBS

•

INSIDE DIAMETER: 0.923 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN

•

COIL QUANTITY: 15

•

SURFACE TREATMENT: CADMIUM OVERALL

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	1.328 INCHES NOMINAL IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATOR	CYLINDRICAL
SPRING FREE LENGTH	5.141 INCHES MINIMUM AND 5.203 INCHES MAXIMUM IN
SPRING DEFLECTION RATE	92.150 POUNDS PER INCH MINIMUM AND 97.850 POUNDS PER INCH MAXIMUM LBS
INSIDE DIAMETER	0.923 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN
COIL QUANTITY	15
SURFACE TREATMENT	CADMIUM OVERALL
COIL HELIX DIRECTION	LEFT-HAND
MATERIAL	STEEL OVERALL

OTHER ITEMS IN FSC 5360 — Coil, Flat, Leaf, and Wire Springs

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5360-00-001-1842 5360-00-001-1945 5360-00-001-2010 5360-00-001-3865 5360-00-001-3950 5360-00-001-4650 5360-00-001-4664 5360-00-001-4703

SUBSTITUTES & CROSS-REFERENCES 2

S6-704AYPC8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

S6-704VVPC8Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy SMP185?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SMP185?

SMP185 is a SPRING,HELICAL,COMPRESSION.

What parts can replace SMP185?

There are 2 known substitutes for SMP185: S6-704AYPC8, S6-704VVPC8. Substitute compatibility should be verified for your specific system.

What is the NSN for SMP185?

SMP185 is cataloged in the U.S. Government catalog under NSN 5360-00-360-6256. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SMP185 — SPRING,HELICAL,COMPRESSION

Request a Quote — SMP185