PartsTable
Technical Data Sheet
Download PDF

SMP12-370 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

SMP12-370: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 12, inside_diameter: 0.020 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, spring_free_length: 0.840 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-022-0608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SMP12-370
NSN: 5360-00-022-0608
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity12
inside_diameter0.020 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
spring_free_length0.840 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter0.128 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
spring_solid_outside_diameter0.128 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NSN5360-00-022-0608
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SPRING,HELICAL,COMPRESSION TITLE COMPONENT PN SMP12-370 MFR SPRING,HELICAL,COMPRES
KEY FEATURES
•
SPRING FREE OUTSIDE DIAMETER: 0.128 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS
•
STYLE DESIGNATOR: CYLINDRICAL
•
SPRING FREE LENGTH: 0.840 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.020 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
•
SPRING SOLID OUTSIDE DIAMETER: 0.128 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
COIL QUANTITY: 12
•
COIL HELIX DIRECTION: RIGHT-HAND OR LEFT-HAND
TECHNICAL CHARACTERISTICS
SPRING FREE OUTSIDE DIAMETER0.128 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
END STYLESPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATORCYLINDRICAL
SPRING FREE LENGTH0.840 INCHES NOMINAL IN
INSIDE DIAMETER0.020 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
SPRING SOLID OUTSIDE DIAMETER0.128 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
COIL QUANTITY12
COIL HELIX DIRECTIONRIGHT-HAND OR LEFT-HAND
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
582007Reference document
Same NSN cross-reference
Reference document — Secondary reference
1652-582007Reference document
Same NSN cross-reference
Reference document — Secondary reference
61683-27Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SMP12-370?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SMP12-370?
SMP12-370 is a SPRING,HELICAL,COMPRESSION.
What parts can replace SMP12-370?
There are 3 known substitutes for SMP12-370: 582007, 1652-582007, 61683-27. Substitute compatibility should be verified for your specific system.
What is the NSN for SMP12-370?
SMP12-370 is cataloged in the U.S. Government catalog under NSN 5360-00-022-0608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SMP12-370