SMLS100-B05-03 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

SMLS100-B05-03: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 EXPANDER, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING, shank_diameter: 0.154 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN, shear_strength: 755 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-099-1002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SMLS100-B05-03

NSN: 5320-01-099-1002
FSC: 5320 — Rivets
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 2024 EXPANDER
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
shank_style	SELF-PLUGGING
shank_diameter	0.154 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
shear_strength	755 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.326 INCHES NOMINAL IN
expansion_device	SERRATED STEM-TYPE W
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	ANODIZE EXPANDER
head_major_diameter	0.286 INCHES NOMINAL IN
minimum_tensile_strength	490 POUNDS PER SQUARE INCH LBS
NSN	5320-01-099-1002

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.154 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.326 INCHES NOMINAL IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN

•

SHANK STYLE: SELF-PLUGGING

•

SURFACE TREATMENT: ANODIZE EXPANDER

•

MINIMUM TENSILE STRENGTH: 490 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.154 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
FASTENER LENGTH	0.326 INCHES NOMINAL IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING
SURFACE TREATMENT	ANODIZE EXPANDER
MINIMUM TENSILE STRENGTH	490 POUNDS PER SQUARE INCH LBS
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
SHEAR STRENGTH	755 SINGLE POUNDS PER SQUARE INCH

SUBSTITUTES & CROSS-REFERENCES 1

MLS100-B05-03Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy SMLS100-B05-03?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SMLS100-B05-03?

SMLS100-B05-03 is a RIVET,BLIND.

What parts can replace SMLS100-B05-03?

There is 1 known substitute for SMLS100-B05-03: MLS100-B05-03. Substitute compatibility should be verified for your specific system.

What is the NSN for SMLS100-B05-03?

SMLS100-B05-03 is cataloged in the U.S. Government catalog under NSN 5320-01-099-1002. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SMLS100-B05-03 — RIVET,BLIND

Request a Quote — SMLS100-B05-03