PartsTable
Technical Data Sheet
PartsTable / MRO / SMD431963
SMD431963 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The SMD431963 is a the manufacturer industrial component. Key specifications include overall_width: 14.000 INCHES NOMINAL IN, overall_height: 1.125 INCHES NOMINAL IN, overall_length: 19.000 INCHES NOMINAL IN, special_features: PRINTED WIRING BOARD 1,RESISTOR 49,CAPACITOR 17,TRANSISTOR 18,SEMICONDUCTOR 9,JACK TIP 5,DELAY LINE 1,CONNECTOR 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-933-4645, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ SMD431963
NSN: 5998-00-933-4645
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
overall_width14.000 INCHES NOMINAL IN
overall_height1.125 INCHES NOMINAL IN
overall_length19.000 INCHES NOMINAL IN
special_featuresPRINTED WIRING BOARD 1,RESISTOR 49,CAPACITOR 17,TRANSISTOR 18,SEMICONDUCTOR 9,JACK TIP 5,DELAY LINE 1,CONNECTOR 1
NSN5998-00-933-4645
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN SMD431963 MFR SMD431963
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESPRINTED WIRING BOARD 1,RESISTOR 49,CAPACITOR 17,TRANSISTOR 18,SEMICONDUCTOR 9,JACK TIP 5,DELAY LINE 1,CONNECTOR 1
OVERALL LENGTH19.000 INCHES NOMINAL IN
OVERALL WIDTH14.000 INCHES NOMINAL IN
OVERALL HEIGHT1.125 INCHES NOMINAL IN
SPECIAL FEATURESPRINTED WIRING BOARD 1,RESISTOR 49,CAPACITOR 17,TRANSISTOR 18,SEMICONDUCTOR 9,JACK TIP 5,DELAY LINE 1,CONNECTOR 1
OVERALL LENGTH19.000 INCHES NOMINAL IN
OVERALL WIDTH14.000 INCHES NOMINAL IN
OVERALL HEIGHT1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
125601Interchangeable
interchangeable cross-reference
interchangeable
125601BInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-16377/27Interchangeable
interchangeable cross-reference
interchangeable
M16377/27-005Interchangeable
interchangeable cross-reference
interchangeable
RIN92P2Interchangeable
interchangeable cross-reference
interchangeable
702-01110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy SMD431963?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SMD431963?
SMD431963 is a SMD431963. It is classified as a MRO (MRO_GENERAL).
What parts can replace SMD431963?
There are 7 known substitutes for SMD431963: 125601, 125601B, MIL-DTL-16377/27 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SMD431963?
SMD431963 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-933-4645. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SMD431963

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026