PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SMB586384
SMB586384 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 20.0 DEGREES NOMINAL, material: RUBBER SYNTHETIC OVERALL, rim_surface_width: 0.062 INCHES NOMINAL IN, peripheral_diameter: 0.656 INCHES NOMINAL IN, center_hole_diameter: 0.375 INCHES NOMINAL IN, cross-sectional_height: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-111-2124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SMB586384
NSN: 5330-00-111-2124
FSC: 5330
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
angle20.0 DEGREES NOMINAL
materialRUBBER SYNTHETIC OVERALL
rim_surface_width0.062 INCHES NOMINAL IN
peripheral_diameter0.656 INCHES NOMINAL IN
center_hole_diameter0.375 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES NOMINAL IN
cross-sectional_shape_styleANGLE
NSN5330-00-111-2124
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SMB586384 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIM SURFACE WIDTH: 0.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 0.656 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
ANGLE: 20.0 DEGREES NOMINAL
•
CENTER HOLE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
PERIPHERAL DIAMETER0.656 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
ANGLE20.0 DEGREES NOMINAL
CENTER HOLE DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
52228Interchangeable
interchangeable cross-reference
interchangeable
DM-2307Interchangeable
interchangeable cross-reference
interchangeable
A1287Interchangeable
interchangeable cross-reference
interchangeable
GGG-W-660Interchangeable
interchangeable cross-reference
interchangeable
B107.110 CAT 2 TY1Interchangeable
interchangeable cross-reference
interchangeable
GGG-W-660 TY1CL1STAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SMB586384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SMB586384?
SMB586384 is a PACKING,PREFORMED.
What parts can replace SMB586384?
There are 14 known substitutes for SMB586384: 52228, DM-2307, A1287 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SMB586384?
SMB586384 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-111-2124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SMB586384

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026