PartsTable
Technical Data Sheet
Download PDF

SMB285267 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SMB285267: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, surface_finish: 125.0 MICROINCHES BOTH ENDS, first_end_style: CHAMFERED, hardness_rating: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.840 INCHES MINIMUM AND 1.870 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-616-5206, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SMB285267
NSN: 5315-00-616-5206
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
surface_finish125.0 MICROINCHES BOTH ENDS
first_end_styleCHAMFERED
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.840 INCHES MINIMUM AND 1.870 INCHES MAXIMUM IN
first_hole_diameter0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
pin_overall_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
second_hole_diameter0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
first_end_taper_angle44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
first_end_taper_length0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
NSN5315-00-616-5206
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SMB285267 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES SHANK END
•
FIRST END TAPER LENGTH: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES SHANK END
SURFACE FINISH125.0 MICROINCHES BOTH ENDS
FIRST END TAPER LENGTH0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
699B224P1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SMB285267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SMB285267?
SMB285267 is a PIN,STRAIGHT,HEADLESS.
What parts can replace SMB285267?
There is 1 known substitute for SMB285267: 699B224P1. Substitute compatibility should be verified for your specific system.
What is the NSN for SMB285267?
SMB285267 is cataloged in the U.S. Government catalog under NSN 5315-00-616-5206. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SMB285267

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.