PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SMB202234
SMB202234 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.610 INCHES MINIMUM AND 4.640 INCHES MAXIMUM IN, overall_length: 6.907 INCHES MINIMUM AND 6.937 INCHES MAXIMUM IN, cross-sectional_thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, material_document_and_classification: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3231 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-510-0602, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SMB202234
NSN: 5330-00-510-0602
FSC: 5330
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
hole_diameter0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.610 INCHES MINIMUM AND 4.640 INCHES MAXIMUM IN
overall_length6.907 INCHES MINIMUM AND 6.937 INCHES MAXIMUM IN
cross-sectional_thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
material_document_and_classificationAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3231 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-510-0602
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SMB202234 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3231 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3231 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH6.907 INCHES MINIMUM AND 6.937 INCHES MAXIMUM IN
OVERALL WIDTH4.610 INCHES MINIMUM AND 4.640 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
K68Interchangeable
interchangeable cross-reference
interchangeable
0584D24536-6Interchangeable
interchangeable cross-reference
interchangeable
MILG7021CLASS1Interchangeable
interchangeable cross-reference
interchangeable
00737 ST25 SH164Interchangeable
interchangeable cross-reference
interchangeable
KC66W300-141Interchangeable
interchangeable cross-reference
interchangeable
1764AS750-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SMB202234?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SMB202234?
SMB202234 is a GASKET.
What parts can replace SMB202234?
There are 10 known substitutes for SMB202234: K68, 0584D24536-6, MILG7021CLASS1 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SMB202234?
SMB202234 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-510-0602. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SMB202234

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026