PartsTable
Technical Data Sheet
Download PDF

SMA100735-4 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SMA100735-4: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.156 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.282 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-682-5135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SMA100735-4
NSN: 5305-00-682-5135
FSC: 5305 — Screws
CAGE: 05147 — SMITH A O CORP ELECTRIC MOTORS DIV (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.156 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length0.282 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch32
NSN5305-00-682-5135
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SMA100735-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.156 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.282 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.156 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD LENGTH0.282 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
100735-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SMA100735-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SMA100735-4?
SMA100735-4 is a SCREW,MACHINE.
What parts can replace SMA100735-4?
There is 1 known substitute for SMA100735-4: 100735-4. Substitute compatibility should be verified for your specific system.
What is the NSN for SMA100735-4?
SMA100735-4 is cataloged in the U.S. Government catalog under NSN 5305-00-682-5135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SMA100735-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.