PartsTable
Technical Data Sheet
Download PDF

SM759J126 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SM759J126: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, flange_width: 0.0330 INCHES NOMINAL IN, bore_diameter: 0.1130 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-409-5165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM759J126
NSN: 3110-00-409-5165
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 59750 — RMB MINIATURE BEARINGS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
flange_width0.0330 INCHES NOMINAL IN
bore_diameter0.1130 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.1520 INCHES NOMINAL IN
outer_ring_width0.1180 INCHES NOMINAL IN
special_featuresDOUBLE FLANGE ON OUTER RING
flange_outside_diameter0.4720 INCHES NOMINAL IN
outer_ring_outside_diameter0.3740 INCHES NOMINAL IN
NSN3110-00-409-5165
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SM759J126 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.1180 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 0.4720 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
FLANGE WIDTH: 0.0330 INCHES NOMINAL IN
•
OUTER RING OUTSIDE DIAMETER: 0.3740 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.1180 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER0.4720 INCHES NOMINAL IN
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESDOUBLE FLANGE ON OUTER RING
FLANGE WIDTH0.0330 INCHES NOMINAL IN
OUTER RING OUTSIDE DIAMETER0.3740 INCHES NOMINAL IN
BORE DIAMETER0.1130 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
196373Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SM759J126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM759J126?
SM759J126 is a BEARING,BALL,ANNULAR.
What parts can replace SM759J126?
There is 1 known substitute for SM759J126: 196373. Substitute compatibility should be verified for your specific system.
What is the NSN for SM759J126?
SM759J126 is cataloged in the U.S. Government catalog under NSN 3110-00-409-5165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM759J126

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.