PartsTable
Technical Data Sheet
Download PDF

SM5-7E — BEARING,ROLLER,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SM5-7E: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.3125 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 3.0050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-775-9053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM5-7E
NSN: 3110-00-775-9053
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
materialSTEEL ROLLER
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.3125 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length3.0050 INCHES NOMINAL IN
shank_diameter0.4375 INCHES NOMINAL IN
inner_ring_width0.5940 INCHES NOMINAL IN
outer_ring_width0.3400 INCHES NOMINAL IN
special_featuresWITH GREASE FITTING
style_designatorSINGLE ROW, CONCAVE ROLLERS
NSN3110-00-775-9053
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SM5-7E · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.4375 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 1.2500 INCHES NOMINAL IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3400 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE ROW, CONCAVE ROLLERS
•
OVERALL OUTSIDE DIAMETER: 1.3400 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.4375 INCHES NOMINAL IN
SHANK THREAD LENGTH1.2500 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3400 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW, CONCAVE ROLLERS
OVERALL LENGTH3.0050 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3400 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SM5-7E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM5-7E?
SM5-7E is a BEARING,ROLLER,ROD END.
What is the NSN for SM5-7E?
SM5-7E is cataloged in the U.S. Government catalog under NSN 3110-00-775-9053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM5-7E