PartsTable
Technical Data Sheet
Download PDF

SM24 — CUTTER,MILLING,METAL SLITTING

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

SM24: CUTTER,MILLING,METAL SLITTING.

The CUTTER,MILLING,METAL SLITTING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, face_width: 2.250 INCHES NOMINAL IN, tooth_type: INTEGRAL, overall_length: 82.6 MILLIMETERS NOMINAL MM, drive_end_shape: SQUARE SINGLE END INTERNAL, outside_diameter: 6.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3455-00-231-3531, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM24
NSN: 3455-00-231-3531
NIINs: 002313531, 006830131, 007291278, 016618437
FSC: 3455 — Cutting Tools for Machine Tools
CAGE: 71201 — BRUBAKER TOOL CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
face_width2.250 INCHES NOMINAL IN
tooth_typeINTEGRAL
overall_length82.6 MILLIMETERS NOMINAL MM
drive_end_shapeSQUARE SINGLE END INTERNAL
outside_diameter6.000 INCHES NOMINAL IN
special_featuresCAN HAVE 14 TO 16 TEETH
style_designatorINTERNAL-INTERNAL
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.500 INCHES NOMINAL SINGLE END IN
internal_configurationJUNCTION CONTACT
NSN3455-00-231-3531
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER,MILLING,METAL SLITTING TITLE COMPONENT PN SM24 MFR CUTTER,MILLING,METAL S
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 2.000 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.000 INCHES NOMINAL IN
•
TOOTH TYPE: INTEGRAL
•
SPECIFICATION/STANDARD DATA: 80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
CUTTING SIDE DESIGNATION: RIGHT-HAND
•
MATERIAL: STEEL
•
FACE WIDTH: 2.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE DIAMETER2.000 INCHES NOMINAL IN
OUTSIDE DIAMETER6.000 INCHES NOMINAL IN
TOOTH TYPEINTEGRAL
SPECIFICATION/STANDARD DATA80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESCAN HAVE 14 TO 16 TEETH
CUTTING SIDE DESIGNATIONRIGHT-HAND
MATERIALSTEEL
FACE WIDTH2.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 10
B94.19 TABLE 19Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASME B94.19Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
54138Reference document
Same NSN cross-reference
Reference document — Secondary reference
GGG-C-755Reference document
Same NSN cross-reference
Reference document — Secondary reference
24613Reference document
Same NSN cross-reference
Reference document — Secondary reference
42913Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SM24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM24?
SM24 is a CUTTER,MILLING,METAL SLITTING.
What parts can replace SM24?
There are 10 known substitutes for SM24: B94.19 TABLE 19, ASME B94.19, 54138 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SM24?
SM24 is cataloged in the U.S. Government catalog under NSN 3455-00-231-3531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM24