PartsTable
Technical Data Sheet
Download PDF

SM1015KA — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SM1015KA: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.9375 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM IN, overall_width: 1.3700 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-8100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM1015KA
NSN: 3110-00-156-8100
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter0.9375 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM IN
overall_width1.3700 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
outer_ring_width15.00 MILLIMETERS NOMINAL MM
style_designatorSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
overall_outside_diameter2.0467 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-156-8100
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SM1015KA · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 15.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
•
OVERALL OUTSIDE DIAMETER: 2.0467 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH15.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
OVERALL WIDTH1.3700 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.0467 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
BORE DIAMETER0.9375 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM IN
MATERIALSTEEL OUTER RING
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SM1015KA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM1015KA?
SM1015KA is a BEARING,BALL,ANNULAR.
What is the NSN for SM1015KA?
SM1015KA is cataloged in the U.S. Government catalog under NSN 3110-00-156-8100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM1015KA