PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SM-D-766931-33
SM-D-766931-33 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.449 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, screw_material: STEEL COMP 303 OR STEEL COMP 410 OR STEEL COMP 416, fastener_length: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-088-6826, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM-D-766931-33
NSN: 5305-01-088-6826
FSC: 5305
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class2A A
thread_length0.449 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303 OR STEEL COMP 410 OR STEEL COMP 416
fastener_length0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
NSN5305-01-088-6826
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SM-D-766931-33 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 32
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE
INTERNAL DRIVE STYLESLOT
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH32
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
FASTENER LENGTH0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
001-30144Interchangeable
interchangeable cross-reference
interchangeable
5T5147Interchangeable
interchangeable cross-reference
interchangeable
MA1605Interchangeable
interchangeable cross-reference
interchangeable
65A81C945Interchangeable
interchangeable cross-reference
interchangeable
02261-0280-14Interchangeable
interchangeable cross-reference
interchangeable
40334Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SM-D-766931-33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM-D-766931-33?
SM-D-766931-33 is a SCREW,MACHINE.
What parts can replace SM-D-766931-33?
There are 15 known substitutes for SM-D-766931-33: 001-30144, 5T5147, MA1605 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SM-D-766931-33?
SM-D-766931-33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-088-6826. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM-D-766931-33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026