PartsTable
Technical Data Sheet
SM-C-969872-1 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.187 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_width: 0.512 INCHES NOMINAL IN, overall_length: 0.625 INCHES NOMINAL IN, surface_treatment: UNABLE TO DECODE, material_thickness: 0.021 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-183-6092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM-C-969872-1
NSN: 5340-01-183-6092
FSC: 5340
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
height0.187 INCHES NOMINAL IN
materialUNABLE TO DECODE
overall_width0.512 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
surface_treatmentUNABLE TO DECODE
material_thickness0.021 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
first_surface_hole_size0.129 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
first_surface_hole_quantity1
NSN5340-01-183-6092
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SM-C-969872-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL THICKNESS: 0.021 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
HEIGHT: 0.187 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE: 0.129 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
MATERIAL: UNABLE TO DECODE
SURFACE TREATMENT: UNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.021 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
OVERALL WIDTH0.512 INCHES NOMINAL IN
HEIGHT0.187 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.129 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
OVERALL LENGTH0.625 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
SURFACE TREATMENTUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
49483Interchangeable
interchangeable cross-reference
interchangeable
SL4973PC47Interchangeable
interchangeable cross-reference
interchangeable
WW9481225PC86Interchangeable
interchangeable cross-reference
interchangeable
2GInterchangeable
interchangeable cross-reference
interchangeable
13251592-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SM-C-969872-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM-C-969872-1?
SM-C-969872-1 is a STRIKE,CATCH.
What parts can replace SM-C-969872-1?
There are 5 known substitutes for SM-C-969872-1: 49483, SL4973PC47, WW9481225PC86 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SM-C-969872-1?
SM-C-969872-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-183-6092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM-C-969872-1