Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050, first_leg_angle: 73.0 DEGREES MINIMUM AND 77.0 DEGREES MAXIMUM, first_leg_width: 0.250 INCHES NOMINAL IN, first_leg_length: 0.359 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL, second_leg_width: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5340-00-322-5634, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SM-B-187286
NSN:5340-00-322-5634 FSC:5340 CAGE:80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
material
STEEL COMP 1050
first_leg_angle
73.0 DEGREES MINIMUM AND 77.0 DEGREES MAXIMUM
first_leg_width
0.250 INCHES NOMINAL IN
first_leg_length
0.359 INCHES NOMINAL IN
second_leg_angle
90.0 DEGREES NOMINAL
second_leg_width
0.625 INCHES NOMINAL IN
special_features
CENTER SECTION HAS ONE 0.169 IN. MIN,0.173 IN. AX DIA HOLE AND HAS A 0.312 IN. W BY 0.422 IN. LG EXTENSION IN
style_designator
DOUBLE ANGLE
second_leg_length
0.487 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
surface_treatment
ENAMEL SEMIGLOSS
mounting_hole_type
PLAIN
first_leg_thickness
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
NSN
5340-00-322-5634
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL: STEEL COMP 1050
•
SECOND LEG THICKNESS: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG SLOT LENGTH: 0.175 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE
•
STYLE DESIGNATOR: DOUBLE ANGLE
•
CENTER SECTION THICKNESS: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL
STEEL COMP 1050
SECOND LEG THICKNESS
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG SLOT LENGTH
0.175 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE
STYLE DESIGNATOR
DOUBLE ANGLE
SPECIAL FEATURES
CENTER SECTION HAS ONE 0.169 IN. MIN,0.173 IN. AX DIA HOLE AND HAS A 0.312 IN. W BY 0.422 IN. LG EXTENSION IN
CENTER SECTION THICKNESS
0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM-B-187286?
SM-B-187286 is a BRACKET,DOUBLE ANGLE.
What parts can replace SM-B-187286?
There are 3 known substitutes for SM-B-187286: 13-505, 55970Y, 55970. Substitute compatibility should be verified for your specific system.
What is the NSN for SM-B-187286?
SM-B-187286 is cataloged in the Federal Logistics Information System under NSN 5340-00-322-5634. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.