PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SM-A-949358-305
SM-A-949358-305 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, style_designator: CURVED ARCH, surface_treatment: CADMIUM, inside_diameter/arch_length: 1.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-501-6192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM-A-949358-305
NSN: 5340-00-501-6192
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
style_designatorCURVED ARCH
surface_treatmentCADMIUM
inside_diameter/arch_length1.500 INCHES NOMINAL IN
NSN5340-00-501-6192
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SM-A-949358-305 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING PAD: NOT INCLUDED
•
CUSHION: NOT INCLUDED
•
INSIDE DIAMETER/ARCH LENGTH: 1.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING PADNOT INCLUDED
CUSHIONNOT INCLUDED
INSIDE DIAMETER/ARCH LENGTH1.500 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
4163Interchangeable
interchangeable cross-reference
interchangeable
622499Interchangeable
interchangeable cross-reference
interchangeable
9629LUPInterchangeable
interchangeable cross-reference
interchangeable
101344-1Interchangeable
interchangeable cross-reference
interchangeable
044163-1Interchangeable
interchangeable cross-reference
interchangeable
PI1166-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SM-A-949358-305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM-A-949358-305?
SM-A-949358-305 is a STRAP,RETAINING.
What parts can replace SM-A-949358-305?
There are 13 known substitutes for SM-A-949358-305: 4163, 622499, 9629LUP and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SM-A-949358-305?
SM-A-949358-305 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-501-6192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM-A-949358-305

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026