PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SM-A-838514
SM-A-838514 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include height: 0.156 INCHES NOMINAL IN, material: STEEL COMP 316, effective_height: 0.063 INCHES NOMINAL IN, outside_diameter: 0.390 INCHES NOMINAL IN, style_designator: CLEAT, end_item_identification: 5805014525730. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-470-9823, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SM-A-838514
NSN: 5340-01-470-9823
FSC: 5340
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
height0.156 INCHES NOMINAL IN
materialSTEEL COMP 316
effective_height0.063 INCHES NOMINAL IN
outside_diameter0.390 INCHES NOMINAL IN
style_designatorCLEAT
end_item_identification5805014525730
distance_from_hole_center_to_end0.125 INCHES NOMINAL IN
NSN5340-01-470-9823
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SM-A-838514 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLEAT
•
MATERIAL: STEEL COMP 316
•
DISTANCE FROM HOLE CENTER TO END: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.390 INCHES NOMINAL IN
•
EFFECTIVE HEIGHT: 0.063 INCHES NOMINAL IN
•
HEIGHT: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCLEAT
MATERIALSTEEL COMP 316
DISTANCE FROM HOLE CENTER TO END0.125 INCHES NOMINAL IN
END ITEM IDENTIFICATION5805014525730
OUTSIDE DIAMETER0.390 INCHES NOMINAL IN
EFFECTIVE HEIGHT0.063 INCHES NOMINAL IN
HEIGHT0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
409074Interchangeable
interchangeable cross-reference
interchangeable
993905-1Interchangeable
interchangeable cross-reference
interchangeable
215-013-0016Interchangeable
interchangeable cross-reference
interchangeable
4824H3113742PC409074Interchangeable
interchangeable cross-reference
interchangeable
4824-3130101REVJPCALLInterchangeable
interchangeable cross-reference
interchangeable
02191-020Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SM-A-838514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SM-A-838514?
SM-A-838514 is a CLAMP,SYNCHRO.
What parts can replace SM-A-838514?
There are 9 known substitutes for SM-A-838514: 409074, 993905-1, 215-013-0016 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SM-A-838514?
SM-A-838514 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-470-9823. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SM-A-838514

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026