PartsTable
Technical Data Sheet
Download PDF

SL7108C-10 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SL7108C-10: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: IRON ALLOY 660 NUT, nut_style: DOUBLE HEXAGON, lubrication: DRY FILM LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-365-3177, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL7108C-10
NSN: 5310-01-365-3177
FSC: 5310 — Nuts and Washers
CAGE: 11815 — SPS TECHNOLOGIES, LLC DBA CHERRY AEROSPACE DIV DIV CHERRY AEROSPACE (USA)
SPECIFICATIONS
materialIRON ALLOY 660 NUT
nut_styleDOUBLE HEXAGON
lubricationDRY FILM LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNF
overall_height0.740 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
washer_thickness0.095 INCHES MINIMUM IN
surface_treatmentCADMIUM AND CHROMATE NUT
width_across_flats0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
NSN5310-01-365-3177
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SL7108C-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WASHER OUTSIDE DIAMETER: 1.050 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
•
THREAD SERIES: UNF
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
WASHER THICKNESS: 0.095 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
OVERALL HEIGHT0.740 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER1.050 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
THREAD SERIESUNF
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
WASHER THICKNESS0.095 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD SINGLE MATERIAL RESPONSE NUT
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 7
67832CD-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
102LH9031-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
BH0030310CMSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
VCU000D-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
H51560-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BMN5024CWD3-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SL7108C-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL7108C-10?
SL7108C-10 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace SL7108C-10?
There are 7 known substitutes for SL7108C-10: 67832CD-10, 102LH9031-10, BH0030310CM and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SL7108C-10?
SL7108C-10 is cataloged in the U.S. Government catalog under NSN 5310-01-365-3177. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL7108C-10