PartsTable
Technical Data Sheet
Download PDF

SL6124-6 — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SL6124-6: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include recess_angle: 99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM, hole_diameter: 0.213 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, overall_height: 0.078 INCHES NOMINAL IN, recess_diameter: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, outside_diameter: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN, special_features: THERMOPLASTIC ADHESIVE BACKING 0.018 IN. THK IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-01-109-9402, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL6124-6
NSN: 5310-01-109-9402
FSC: 5310 — Nuts and Washers
CAGE: 97393 — SPS TECHNOLOGIES LLC DBA SHUR-LOK COMPANY DIV AEROSPACE ENGINEERED PRODUCTS DIVISION (USA)
SPECIFICATIONS
recess_angle99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM
hole_diameter0.213 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
overall_height0.078 INCHES NOMINAL IN
recess_diameter0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
outside_diameter0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
special_featuresTHERMOPLASTIC ADHESIVE BACKING 0.018 IN. THK IN
style_designatorFINISHING
surface_treatmentPASSIVATE OVERALL
material_thickness0.008 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
minimum_tensile_strength140000 POUNDS PER SQUARE INCH LBS
material_document_and_classificationAMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-109-9402
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SL6124-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: FINISHING
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.008 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.078 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORFINISHING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
MATERIAL THICKNESS0.008 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
RECESS DIAMETER0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
SPECIAL FEATURESTHERMOPLASTIC ADHESIVE BACKING 0.018 IN. THK IN
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH140000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
AS63-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SL6124-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL6124-6?
SL6124-6 is a WASHER,FINISHING.
What parts can replace SL6124-6?
There is 1 known substitute for SL6124-6: AS63-6. Substitute compatibility should be verified for your specific system.
What is the NSN for SL6124-6?
SL6124-6 is cataloged in the U.S. Government catalog under NSN 5310-01-109-9402. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL6124-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.