PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SL5563PC112
SL5563PC112 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 3.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-7260, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL5563PC112
NSN: 5330-00-178-7260
FSC: 5330
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter3.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.438 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-178-7260
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SL5563PC112 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 3.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 2.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER3.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER2.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
SEAL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
1550Interchangeable
interchangeable cross-reference
interchangeable
613Interchangeable
interchangeable cross-reference
interchangeable
1749Interchangeable
interchangeable cross-reference
interchangeable
20-28Interchangeable
interchangeable cross-reference
interchangeable
3N38PC20Interchangeable
interchangeable cross-reference
interchangeable
NN16-5PC20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SL5563PC112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL5563PC112?
SL5563PC112 is a SEAL,PLAIN ENCASED.
What parts can replace SL5563PC112?
There are 23 known substitutes for SL5563PC112: 1550, 613, 1749 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SL5563PC112?
SL5563PC112 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-7260. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL5563PC112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026