PartsTable
Technical Data Sheet
Download PDF

SL212M5-1 — NUT,CLIP-ON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SL212M5-1: NUT,CLIP-ON.

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL NUT, nut_style: FLOATING, thread_class: NO ALLOWANCE, overall_width: 11.7 MILLIMETERS NOMINAL MM, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), locking_feature: FREE-RUNNING ALL METAL DESIGN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-472-5817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL212M5-1
NSN: 5310-00-472-5817
FSC: 5310 — Nuts and Washers
CAGE: 97393 — SPS TECHNOLOGIES LLC DBA SHUR-LOK COMPANY DIV AEROSPACE ENGINEERED PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL NUT
nut_styleFLOATING
thread_classNO ALLOWANCE
overall_width11.7 MILLIMETERS NOMINAL MM
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
locking_featureFREE-RUNNING ALL METAL DESIGN
panel_thickness8.5 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND
surface_treatmentCADMIUM CLIP
nominal_thread_size5.0 MILLIMETERS MM
thread_pitch_diameters+0.1764 TO 0.1812 INCHES IN
thread_pitch_in_millimeters0.80
NSN5310-00-472-5817
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SL212M5-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
THREAD PITCH IN MILLIMETERS: 0.80
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 6.7 MILLIMETERS NOMINAL MM
•
THREAD PITCH DIAMETERS: +0.1764 TO 0.1812 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
PANEL THICKNESS: 8.5 MILLIMETERS NOMINAL MM
•
NOMINAL THREAD SIZE: 5.0 MILLIMETERS MM
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD PITCH IN MILLIMETERS0.80
DISTANCE FROM BASE TO CENTER OF APERTURE6.7 MILLIMETERS NOMINAL MM
THREAD PITCH DIAMETERS+0.1764 TO 0.1812 INCHES IN
OVERALL WIDTH11.7 MILLIMETERS NOMINAL MM
THREAD DIRECTIONRIGHT-HAND
PANEL THICKNESS8.5 MILLIMETERS NOMINAL MM
NOMINAL THREAD SIZE5.0 MILLIMETERS MM
LOCKING FEATUREFREE-RUNNING ALL METAL DESIGN
SURFACE TREATMENTANODIZE NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
N5484656051Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SL100M5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SL212M5-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL212M5-1?
SL212M5-1 is a NUT,CLIP-ON.
What parts can replace SL212M5-1?
There are 2 known substitutes for SL212M5-1: N5484656051, SL100M5. Substitute compatibility should be verified for your specific system.
What is the NSN for SL212M5-1?
SL212M5-1 is cataloged in the U.S. Government catalog under NSN 5310-00-472-5817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL212M5-1