PartsTable
Technical Data Sheet
Download PDF

SL211-08-1 — PUSH ON NUT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SL211-08-1: PUSH ON NUT.

The PUSH ON NUT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: FLOATING, lubrication: DRY FILM LUBRICANT, thread_class: 3B, overall_width: 0.395 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, thread_series: UNJC. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-136-5543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL211-08-1
NSN: 5310-00-136-5543
NIINs: 001365543, 009499255, 014971478
FSC: 5310 — Nuts and Washers
CAGE: 15653 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleFLOATING
lubricationDRY FILM LUBRICANT
thread_class3B
overall_width0.395 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
thread_seriesUNJC
panel_thickness0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
special_featuresCLIP TO FLOAT APPROX. .011 RADIALLY
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.164 INCHES IN
end_item_identification13458175, MQM-170E
NSN5310-00-136-5543
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SL211-08-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.0432 INCHES NOMINAL IN
•
NUT LENGTH: 0.650 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.160 INCHES NOMINAL IN
•
NUT STYLE: PUSH ON
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NUT WIDTH0.0432 INCHES NOMINAL IN
NUT LENGTH0.650 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
MATING MEMBER DIAMETER ACCOMMODATED0.160 INCHES NOMINAL IN
NUT STYLEPUSH ON
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
SL201M5AA1-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SL211-08-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL211-08-1?
SL211-08-1 is a PUSH ON NUT.
What parts can replace SL211-08-1?
There is 1 known substitute for SL211-08-1: SL201M5AA1-1. Substitute compatibility should be verified for your specific system.
What is the NSN for SL211-08-1?
SL211-08-1 is cataloged in the U.S. Government catalog under NSN 5310-00-136-5543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL211-08-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.