PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SL2052-3-3
SL2052-3-3 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The INSERT,PANEL FASTENER is a the manufacturer industrial component. Key specifications include hole_type: THREADEDTHREADED, insert_style: PROTRUDING FLANGEPROTRUDING FLANGE, overall_length: 0.340 INCHES NOMINAL0.340 INCHES NOMINAL IN, flange_diameter: 0.593 INCHES NOMINAL0.593 INCHES NOMINAL IN, special_features: FLOATING NUT TYPE AND 0.010 IN. MIN 0.019 IN.

MAX SKIN THKFLOATING NUT TYPE AND 0.010 IN. MIN 0.019 IN. MAX SKIN THK IN, features_provided: POTTING HOLEPOTTING HOLE.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-073-6298, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL2052-3-3
NSN: 5325-00-073-6298
FSC: 5325
CAGE: 97393 — SPS TECHNOLOGIES LLC DBA SHUR-LOK COMPANY DIV AEROSPACE ENGINEERED PRODUCTS DIVISION (USA)
SPECIFICATIONS
hole_typeTHREADEDTHREADED
insert_stylePROTRUDING FLANGEPROTRUDING FLANGE
overall_length0.340 INCHES NOMINAL0.340 INCHES NOMINAL IN
flange_diameter0.593 INCHES NOMINAL0.593 INCHES NOMINAL IN
special_featuresFLOATING NUT TYPE AND 0.010 IN. MIN 0.019 IN. MAX SKIN THKFLOATING NUT TYPE AND 0.010 IN. MIN 0.019 IN. MAX SKIN THK IN
features_providedPOTTING HOLEPOTTING HOLE
shoulder_diameter0.551 INCHES NOMINAL0.551 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
thread_size_and_series/type_designator0.190-32 UNIFIED NATIONAL JOINT FINE (UNJF)
surface_treatment_document_and_classificationQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5325-00-073-6298
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SL2052-3-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
INSERT STYLE: PROTRUDING FLANGEPROTRUDING FLANGE
•
FLANGE DIAMETER: 0.593 INCHES NOMINAL0.593 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.551 INCHES NOMINAL0.551 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
HOLE TYPE: THREADEDTHREADED
•
MATERIAL: STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1040 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
INSERT STYLEPROTRUDING FLANGEPROTRUDING FLANGE
FLANGE DIAMETER0.593 INCHES NOMINAL0.593 INCHES NOMINAL IN
SHOULDER DIAMETER0.551 INCHES NOMINAL0.551 INCHES NOMINAL IN
OVERALL LENGTH0.340 INCHES NOMINAL0.340 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
HOLE TYPETHREADEDTHREADED
MATERIALSTEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1040 OVERALL
FEATURES PROVIDEDPOTTING HOLEPOTTING HOLE
SPECIAL FEATURESFLOATING NUT TYPE AND 0.010 IN. MIN 0.019 IN. MAX SKIN THKFLOATING NUT TYPE AND 0.010 IN. MIN 0.019 IN. MAX SKIN THK IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
257-007-0002Interchangeable
interchangeable cross-reference
interchangeable
VM400-6Interchangeable
interchangeable cross-reference
interchangeable
800052-6Interchangeable
interchangeable cross-reference
interchangeable
495SF1032-06-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SL2052-3-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL2052-3-3?
SL2052-3-3 is a INSERT,PANEL FASTENER.
What parts can replace SL2052-3-3?
There are 4 known substitutes for SL2052-3-3: 257-007-0002, VM400-6, 800052-6 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SL2052-3-3?
SL2052-3-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-073-6298. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL2052-3-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026