PartsTable
Technical Data Sheet
Download PDF

SL200-6AA11 — NUT,CLIP-ON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SL200-6AA11: NUT,CLIP-ON.

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: FLOATING, thread_class: 2B, overall_width: 0.437 INCHES NOMINAL IN, thread_series: UNJC, panel_thickness: 0.060 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-877-5411, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL200-6AA11
NSN: 5310-00-877-5411
FSC: 5310 — Nuts and Washers
CAGE: 97393 — SPS TECHNOLOGIES LLC DBA SHUR-LOK COMPANY DIV AEROSPACE ENGINEERED PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleFLOATING
thread_class2B
overall_width0.437 INCHES NOMINAL IN
thread_seriesUNJC
panel_thickness0.060 INCHES MINIMUM IN
special_featuresDRY FILM LUBRICANT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.164 INCHES IN
thread_quantity_per_inch32
distance_from_base_to_center_of_aperture0.275 INCHES NOMINAL IN
NSN5310-00-877-5411
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SL200-6AA11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNJC
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.275 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
PANEL THICKNESS: 0.060 INCHES MINIMUM IN
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNJC
DISTANCE FROM BASE TO CENTER OF APERTURE0.275 INCHES NOMINAL IN
OVERALL WIDTH0.437 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
PANEL THICKNESS0.060 INCHES MINIMUM IN
NOMINAL THREAD SIZE0.164 INCHES IN
SPECIAL FEATURESDRY FILM LUBRICANT
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NUT STYLEFLOATING
SUBSTITUTES & CROSS-REFERENCES 3
SL210-08-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
210-08-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
202-16110-08Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SL200-6AA11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL200-6AA11?
SL200-6AA11 is a NUT,CLIP-ON.
What parts can replace SL200-6AA11?
There are 3 known substitutes for SL200-6AA11: SL210-08-1, 210-08-1, 202-16110-08. Substitute compatibility should be verified for your specific system.
What is the NSN for SL200-6AA11?
SL200-6AA11 is cataloged in the U.S. Government catalog under NSN 5310-00-877-5411. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL200-6AA11