PartsTable
Technical Data Sheet
Download PDF

SL 6063PC30A — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

SL 6063PC30A: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, body_style: PLAIN, corner_shape: SQUARE ALL CORNERS, overall_length: 0.312 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES INSIDE, body_inside_diameter: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4320-00-142-1987, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SL 6063PC30A
NSN: 4320-00-142-1987
FSC: 4320 — Power and Hand Pumps
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialCOPPER ALLOY
body_stylePLAIN
corner_shapeSQUARE ALL CORNERS
overall_length0.312 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES INSIDE
body_inside_diameter1.750 INCHES NOMINAL IN
body_outside_diameter2.377 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
material_document_and_classificationMIL-B-16261,GR 3 MIL SPEC SINGLE MATERIAL RESPONSE
NSN4320-00-142-1987
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND TITLE COMPONENT PN SL 6063PC30A MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OUTSIDE
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY STYLE: PLAIN
•
BODY OUTSIDE DIAMETER: 2.377 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-16261,GR 3 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OUTSIDE
SURFACE FINISH125.0 MICROINCHES LEFT FACE
SURFACE FINISH125.0 MICROINCHES INSIDE
SURFACE FINISH125.0 MICROINCHES RIGHT FACE
CORNER SHAPESQUARE ALL CORNERS
BODY STYLEPLAIN
BODY OUTSIDE DIAMETER2.377 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-16261,GR 3 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH0.312 INCHES NOMINAL IN
BODY INSIDE DIAMETER1.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
102PReference document
Same NSN cross-reference
Reference document — Secondary reference
SL 5920PC30AReference document
Same NSN cross-reference
Reference document — Secondary reference
302660-00Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy SL 6063PC30A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SL 6063PC30A?
SL 6063PC30A is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace SL 6063PC30A?
There are 3 known substitutes for SL 6063PC30A: 102P, SL 5920PC30A, 302660-00. Substitute compatibility should be verified for your specific system.
What is the NSN for SL 6063PC30A?
SL 6063PC30A is cataloged in the U.S. Government catalog under NSN 4320-00-142-1987. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SL 6063PC30A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.